Ceramic-glass Built-in CooktopInstructions for use, mounting and connectionIEGBMT
436550• Worktop should be perfectly levelled.• Respect the instructions shown in Fig. 1 regarding installation.• Protect the cut edges and openings
436550• The electric built-in cooker has to be mounted and installed by a qualifi ed technician. The protection of the electrical wiring shall comply
436550NOTE: In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a designated plac
WE RESERVE THE RIGHT TO MAKE ANY CHANGES THAT DO NOT AFFECT THE FUNCTIONALITY OF THE APPLIANCE. 436550TypeInstructions for use of the appliance can al
43655014
SVK 667S en (04-14)
436550Important - Read before using the appliance ...3Glass Ceramic Cooktop ...5Energy Saving
436550• The appliance may only be connected to the power mains by an authorized service technician or expert.• Tampering with the appliance or non-p
436550• Do not store temperature-sensitive items underneath the appliance, such as cleaners or detergents, spray cans etc.• Using the glass ceramic
436550The glass ceramic cooktop has four heating zones. Its surface is fl at and there are no edges where food remains usually collect.• The heating z
436550Use only high quality pots with fl at and stable bottom. • Always be careful to put the pot in the middle of the cooking zone.• If you use the
436550The cooking zones are controlled by knobs mountedl on the control panel of the cooker. The heating degrees are marked on the knobs from 1 to 6,
436550Hold the scraper at the correct angle (45° to 60°). Gently press the scraper against the glass and slide it over the signage to remove the dirt.
436550Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket must be attached to the lower side of the glass
Commentaires sur ces manuels